If you have made small changes to your electrical installation, and the monitor's configuration does not reflect your actual situation anymore, the monitor will not measure your installation correctly.
To change the configuration of the monitor, please go to the mobile app and log in. Go to Settings > Your Smappee monitors > Configuration. Here you can change the configuration of the monitor.
- Solar panels: Yes or No.
- Solar production: export only surplus or export all
- Single-phase or three-phase
- Star or delta in case of a 3-phase installation
Note:
Before changing the configuration, please make sure your monitor can still measure your actual situation. Energy monitors (serial 10xxxxxxxx) can only measure single phase consumption + solar or
three-phase electrical installations!