What does the EV Line LED and Connector state tell me

EV Line LED and Connector state

All our EV Line products have an LED which represents the Connector Status as well as the current state of our charger.

Each state has its own colour and meaning, please see the table below:

State (Colour) Description
Available (White) No Cable is connected

Unavailable (Red)

Station is made unavailable via the Dashboard or EV Automation
Cable Connected (Blue) Cable is connected but not authorized to charge
Charging (Green Pulsing) Stations allows Charging and Car is charging
Charging Ended (Green Continuous) Station allows Charging but Car has stopped charging, usually due to a full battery
Paused (Green Pulsing) Overload has paused the charging or user has pressed "Stop" in the Smappee App
Error (Red) Station spotted an Error: For example RCM that detects residual current

mceclip5.png

Important notes

  • When a station has not been activated yet, its LED will be red
  • When a station is set to Plug and Charge it will remain white when losing internet connection
  • When a Station is set to any session activation method that requires authentication (such as Swipe and Charge) then its LED will become red when losing internet connection

Testing if a Stations responds to commands

To quickly test if a station responds to a command you can Disable/Enable the station by pressing the right Action button in the card.

mceclip6.png

Once you have pressed the Disable button it should take no more than 10 seconds before the "Unavailable" state pops up under the Connector column. This is the live state of the Connector, so if this works then you know that the Charging Station is working as intended.

mceclip7.png